All products

Product List

As our products can fit in different categories, we here list an alphabetical list off all products.

    1:4 resistive splitter/combiner PCBAs

    multi-channel software-controlled RF digital step attenuators

    16-channel GPS antenna splitter

    16-channel GPS antenna RF signal splitter divider

    customized sysmocom SIM / USIM / ISIM cards

    customized SIM cards are available in bulk-volume, pre-programmed according to operator requirements and printed with custom artwork.

    IoT² 608

    The IoT² 608 is a multistandard mobile network simulator for lab testing of M2M solutions. It can simulate two mobile operators at the same time in three different generations from 2G to 4G.

    M.2 WWAN modem breakout board

    The sysmocom M.2 WWAN breakout board is a useful utility for evaluating any kind of M.2 cellular modems.

    MFF2 ZIF Adapter

    The MFF2 ZIF Adapter is used for testing/programming MMF2 in smart card readers, modems, phones, etc.

    miniPCIe WWAN modem breakout board

    The sysmocom miniPCIe WWAN breakout board is a useful utility for evaluating any kind of miniPCIe cellular modems.

    ngff-cardem: M.2 modem carrier with remote SIM / tracing

    The sysmocom M.2 modem carrier with remote SIM / tracing combines our well known modem carrier with our even more well known SIMtrace 2

    OsmoBSC

    The OsmoBSC is a classic GSM BSC, connecting not only OsmoBTS but also third party BTS to an MSC.

    OsmoBTS

    The OsmoBTS is the BTS software running on all our sysmoBTS.

    Osmocom icE1usb

    The Osmocom icE1usb is an open source hardware USB-attached E1 interface

    OsmoGbProxy

    The OsmoGbProxy is a versatile node for translation purposes in Gb traffic

    OsmoGGSN

    OsmoGGSN is the Osmocom implementation of a Gateway GPRS Support Node

    OsmoHLR

    The Home Location Register (HLR) is a central component in a mobile network. The OsmoHLR is a minimal implementation.

    OsmoHNBGW

    OsmoHNBGW is Osmocom's move to 3G, implementing the interconnection point between hNodeB (basically the BTS in 3G) and the MSC.

    OsmoMGW

    OsmoMGW, the Osmocom Media Gateway, is a Media Gateway for handling user plane (voice) traffic in cellular networks.

    OsmoMSC

    OsmoMSC is the Osmocom implementation of a Mobile Switching Center (MSC).

    OsmoPCU

    The OsmoPCU is an Open Source GPRS/EGPRS PCU (Packet Control Unit) with Gb/IP interface.

    OsmoSGSN

    The OsmoSGSN is a software-defined implementating of a 3GPP SGSN for GPRS and UMTS/HSPA

    OsmoSIP connector

    OsmoSIP connector is the modern gateway between the MNCC Interface of OsmoMSC and an external SIP trunk.

    OsmoSTP

    OsmoSTP connects the Osmocom Cellular Network Infrastructure to the SS7 network

    SIMtrace2 - Debugging, tracing and emulating SIM card communication

    The sysmocom SIMtrace allows to debug and tracing SIM/USIM/ISIM card APDUs. The device is placed between a mobile phone and the SIM/USIM/ISIM card. This allows to capture the communication between the two entities.

    software-controlled RF digital step attenuators

    multi-channel software-controlled RF digital step attenuators

    sysmoBTS 1002

    The sysmoBTS 1002 is a small-form-factor, low-power single TRX GSM BTS. It offers supreme cost efficiency and is suitable for a wide range of applications.

    sysmoBTS 1002OD

    The sysmoBTS 1002OD is the outdoor version of the well known sysmoBTS 1002. It also offers PoE.

    sysmoBTS 1020

    The sysmoBTS 1020 is a small-form-factor, 2 W single TRX GSM BTS. It offers supreme cost efficiency and is suitable for a wide range of applications.

    sysmoBTS 2100

    The sysmoBTS 2100 is small-formfactor, 2*10W dual TRX GSM BTS and is ideal for medium coverage outdoor applications.

    sysmoCNA

    The sysmoCNS is a versatile, efficient, silent and compact network appliance.

    sysmocom cavity duplexers

    sysmocom cavity duplexers are cost-effective cavity duplexers for combining Rx and Tx path of FDD cellular systems such as GSM, UMTS and LTE

    sysmocom eUICC for eSIM

    sysmocom eUICC in MFF2 solder or 2FF/3FF/4FF plastic package

    sysmocom RF cavity filter

    sysmocom cavity filters are cost-effective cavity filtrs for a variety of RF use cases

    sysmoISIM-SJA2 programmable SIM/USIM/ISIM cards

    The sysmoISIM-SJA2 is a standards-compliant GSM SIM + USIM + ISIM card (2FF, 3FF, 4FF). It is intended to be used in sysmoNITB based networks , but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.

    sysmoISIM-SJA5 programmable SIM/USIM/ISIM/HPSIM cards

    The sysmoISIM-SJA5 is a standards-compliant GSM SIM + USIM + ISIM + HPSIM card (2FF, 3FF, 4FF). It is intended to be used in sysmoNITB based networks, but can be used with any core network, from GSM (2G) through UMTS (3G) and LTE (4G) as well as 5G.

    sysmoNITB GSM-R Lab Solution

    sysmocom has added GSM-R support to the Osmocom CNI. This enables us to offer a lab network solution for evaluation, development and tests for GSM-R equipment, including support for GSM-R voice features like NCH broadcast, voice group calls and voice broadcast. Circuit switched data is also supported.

    sysmoNITB Starter Kit

    The sysmoNITB Starter Kit is the perfect starting point to set up mobile networks: 2G, 3G5 and/or 4G. The sysmoNITB, one or multiple base stations of your choice and SIM cards provide everything to just plug and play a cost efficient mobile network for lab usage.

    sysmoOCTSIM

    The sysmoOCTSIM is an eight-slot smart card reader printed circuit board assembly (PCBA) with USB-CCID interface.

    sysmoQMOD

    The sysmoQMOD hosts up to four mPCIE WWAN Modules with remote management and remote SIM capabilities. Modems and management are controlled via USB.

    sysmoSIMBANK

    The sysmoSIMBANK is a 96 or 192 slot rack-mount network smart card reader